PIP9 - PC compact fanless durci

Accueil PIP IPM MIP http://www.mplag.fr

[PIP9: Pentium III at 933 MHz, 3D Graphics and still no Fan!]

933 Mhz, graphiques 3D et toujours pas de ventilateur!

Fiche technique PDF

 

Disponible en version Panel PIP,  boîtier alu ou acier IP65 avec écran intégré 12'' à 19''.

Spécifications générales:

bullet- Consommation 15W avec entrée 8-48 VDC
bullet- 4 ports série (RS232 / RS485)
bullet- USB 2.0, IEEE1934, Ethernet, CAN
bullet- Expansion PC/104+ et PCI (plusieurs boîtiers disponibles)
bullet- Nombreuse possibilités d'expansion et périphériques
bullet- Température en opération de 0°C à 60°C, en option de -40°C à +75°C

 

Caractéristiques techniques:
Processor Low Power Embedded Pentium lll® CPU, 933 MHz 64-Bit Data Bus, pipelined floating point unit (IEEE754) 512kB ECC protected L2 Cache
Intel long-term supply program
Temperature sensor Chip Set Supervises CPU temperature, thermal throttling Ali ALADDiN pro 5T, 133 MHz host bus speed Programmable temperature threshold Supports AGP 4x
BIOS 256kB Flash EEPROM, easy BIOS update MPL engineered BIOS (General Software)
DDR SDRAM 200-pin SO-DIMM socket for one module Up to 512MB, supports up to 512Mbit chips
FLASH 44-pin header Flash modules or disks Up to 8GB Flash
Multi Purpose Socket Supports DiskOnChip®, SRAM, FLASH, EPROM 28 & 32 pin DIL, up to 512kB memory size
RTC backed with on- board Battery battery, field exchangeable CMOS setup can be saved in EEPROM
Graphic Interface Silicon Motion low power controller, AGP 4x, 128-bit 3D graphic engine, MPEG2 /DVD, TV encoder, ZV port, resolution up to 1600 x 1200 (UXGA) flexible panel support 15-pin DSUB (RGB analog IF, VGA)
refresh rate up to 85Hz
50-pin socket for 18 bit parallel data,
PanelLink, FPD-Link
4 x Serial Ports 16C550 compatible (2 x 16 byte FIFO & 2 x 128 byte FIFO) (optional) 2 ports can be modified optionally to RS422/485, half & full duplex, electrically fully isolated 4 x 9-pin DSUB, ESD protected +/- 15kV
Transfer rates up to 115.2 kBaud
All modem signals available on all 4 ports
2 x USB Interface USB 1.1 ports (USB 2.0 available in PIP9-1 version) 2 x Type A connectors
Parallel Port SPP, EPP, ECP (IEEE1284), LPT1 - 3 configurable 25-pin D-SUB connector, ESD protected
2 x E-IDE Port Up to 4 drives PIO mode 4 and BusMaster IDE Standard 44-pin & 40-pin header
FDD Port one port for up to 2 drives Connection for internal or external device
PC/104-Plus Interface LPC to ISA bridge for 16 bit PC/104 Interface (up to 4 slots) PCI to PCI bridge for 32 bit PC/104-Plus Interface Additional expansion for up to 3 slots, expansion for half size PCI cards  
Keyboard / Mouse PS/2 Interface 6.pin mini DIN connector, ESD protected
Ethernet 10BaseT /100BaseTX
Fast 10/100Mbit/s, support IEEE802.3u auto negotiation		 RJ45 connector
ESD protected
Watchdog integrated  
Indicator 6 activity LED's + 2 user definable Power, Reset, HDD, IEEE1394, LAN/100
Power Reset Button On chassis (protected) and a remote reset button ATX functionality
Speaker port Easy connection of speaker Available on internal header
On-board option
FireWire Interface Two high speed IEEE1394I/F, up to 400Mbit Ext. Power supply possible
USB 2.0 compliant with OHCI Rev. 1.0a & EHCI Rev. 1.0, supports
mixed device operation, up to 480 Mbit/s		 1 x USB 2.0 external over Type A connector
5 x USB 2.0/1.1 interfaces on internal header
Additional optional Features
IrDA port Support IrDA 1.0/1.1 / FIR- MIR, sharp modes Available on internal header, ESD protected
I/O port 8-bit X-Bus interface, data lines 5V tolerant TTL I/O's Available on internal header, ESD protected
AC97 audio interface 32-voices DirectSound, 16-voices DirectSound 3D accel. Available on internal header, ESD protected
MS/SD card interface MS/SD card on internal connector Available on internal header, ESD protected
CAN Bus Opto-isolated CAN Bus interface (CAN Spec. 2.0) Available on internal header, ESD protected
Physical / Power
Chassis Rugged chromated aluminium chassis with EMI protection DIN-rail, wall mounting, desktop version
Size & weight 270 x 162 x 62 / 83 /120 mm (L x W x H) /2.2kg 10.6 x 6.4 x 2.4/ 3.3/4.7 inch/ 4.85 pounds
Power 8 - 28VDC supply power, optionally up to 48VDC
ATX behaviour (Soft off), Optional UPS functionality,		 high efficiency 4 channel switching
regulator
Power consumption typically < 15 Watt 12VDC, 933MHz, 512MB DDRAM, HDD,
Floppy
Temperature Range 0°C up to 60°C, optional -40°C up to 75°C No fan or opening in housing are required
Humidity 10% - 90% non condensing  
Shock & Vibration Complies with EN60068-2-6 and EN60068-2-27  
EMI, CE, EN50081-2, EN50082-2, test data available for review  
PIP9 versions Expansions & options Operation systems
- PIP9-1 with USB 2.0 & FireWire

- PIP9-2 without USB 2.0 FireWire

- PIP9-xC customer specific
bulletOver the PC/104 & PC/104+
bulletDigital I/O's
bulletAnalog I/O's
bulletFieldbus
bulletOr any other PC/104 Module
bulletHard Disks
bulletFlash Disks
bulletFloppy
bulletPCMCIA slots
bullet6.4" TFT panel (built in chassis)
bullet15" - 19" solution in Aluminium and stainless steel
bulletTouch Screen
bulletUPS functionality
and more
bulletLCD Display connections
bullet18-bit data for up to 1 m
bulletDLS (LVDS) up to 15m
bulletPanelLink solution up to 15 m
bulletFPD-Link up to 15 m
bulletRemote MMI option for operating distance of up to 15m with connectors for RS232, mouse & Keyboard and USB
100% PC/AT compatible therefore any PC operating system (Windows, LINUX, RT OS....) can be used

For other requirements please contact MPL AG

GPC SARL            Email: info@pcindus.com            Tél.: 03 85 59 65 06            Fax: 03 85 59 65 07